Table of Contents
Advertisement
S
S
UPER
ERVER 5015P-8(R)/5015P-T(R) User's Manual
I/O Device Confi guration
Access the submenu to make changes to the following settings.
KBC Clock input
This setting allows you to set the clock frequency for the Keyboard Clock. The
options are 6MHz, 8MHz, 12 MHz and 16MHz.
Serial Port A
This setting allows you to decide how Serial Port A is controlled. The options
are Enabled (user defi ned), Disabled, and Auto (BIOS- or OS- controlled).
Base I/O Address
Select the base I/O address for Serial Port A. The options are 3F8, 2F8,
3E8 and 2E8.
Interrupt
Set the Interrupt for Serial Port A. The options are IRQ3 and IRQ4.
Serial Port B
This setting allows you to decide how Serial Port B is controlled. The options
are Enabled (user defi ned), Disabled, and Auto (BIOS- or OS- controlled).
Mode
This feature allows the user to set the mode for Serial Port B. The options
are Normal and IR.
Base I/O Address
Select the base I/O address for Serial Port B. The options are 3F8, 2F8,
3E8 and 2E8.
Interrupt
Set the Interrupt for Serial Port B. The options are IRQ3 and IRQ4.
Floppy Disk Controller
This setting allows you to assign control of the fl oppy disk controller. The options
are Enabled (user defi ned), Disabled, and Auto (BIOS and OS controlled).
Base I/O Address
Select the base I/O address for the parallel port. The options are Primary and
Secondary.
7-14
Advertisement
Table of Contents
