Table of Contents
Advertisement
Primary IDE Master/Slave and Secondary IDE Master/Slave
These settings allow the user to set the parameters of Primary IDE Master/Slave
and Secondary IDE Master/Slave slots. Hit <Enter> to activate the following sub-
menu screen for detailed options of these items. Set the correct confi gurations
accordingly. The items included in the sub-menu are:
Type
Selects the type of IDE hard drive. The options are Auto, (which allows BIOS
to automatically determine the hard drive's capacity, number of heads, etc.), a
number from 1-39 to select a predetermined type of hard drive, CDROM and
ATAPI Removable. The option- "User" will allow the user to enter the parameters
of the HDD installed at this connection. The option-"Auto" will allow BIOS to
automatically confi gure the parameters of the HDD installed at the connection.
Choose the option 1-39 to select a predetermined HDD type. Select CDROM if a
CDROM drive is installed. Select ATAPI if a removable disk drive is installed.
7-5
Chapter 7: BIOS
Advertisement
Table of Contents
