TP-Link Omada IES210GPP Quick Start Manual page 3

About this Guide
This Installation Guide describes the hardware characteristics, installation methods and the
points that should be attended to during the installation. This Installation Guide is structured
as follows:
Chapter 1 Product Overview
This chapter describes the external components of the switch.
Chapter 2 Installation
This chapter illustrates the installation procedures of the switch.
Chapter 3 Configuration
This chapter describe the configuration modes of the switch.
Appendix A Troubleshooting
Appendix B Specifications
Audience
This Installation Guide is for:
Network Engineer
Conventions
• Some models featured in this guide may be unavailable in your country or region. For local
sales information, visit our official website: https://www.omadanetworks.com/.
• The figures in this guide are for demonstration purposes only. Your switch may differ in
appearance from that depicted.
• The PoE budget is based on lab tests and may vary due to power supply, client limitations,
and environmental factors.
• This guide uses the specific formats to highlight special messages. The following table
lists the notice formats that are used throughout this guide.
Remind to be careful. A caution indicates a potential which may result in
Caution
device damage.
Remind to take notice. The note contains the helpful information for a better
Note
use of the product.
Network Administrator
Omada Industrial Easy Managed Switch