TP-Link Omada IES210GPP Quick Start Manual page 16

Chapter 3
3.1 Configuration Overview
The switch supports two configuration options:
• Standalone Mode: Configure and manage the switch singly.
• Controller Mode: Configure and manage the network devices centrally. It is recommended
in the large-scale network, which consists of mass devices such as access points, switches,
and gateways.
Note:
When the switch is changed from Standalone Mode to Controller Mode, configurations of
the switch will be lost. For details, refer to the related documents on our official website:
https://support.omadanetworks.com/document/.
3.2 Standalone Mode
To set up a standalone Omada switch, scan the QR code or refer to the Omada Standalone
Configuration Guide at https://www.omadanetworks.com/support/faq/4097/.
Scan for Standalone Configuration Guide
3.3 Controller Mode
To set up an Omada switch with an Omada Controller, scan the QR code or refer to the Omada
Controller configuration guide at https://www.omadanetworks.com/support/faq/4096/.
Scan for Controller Configuration Guide
Configuration
Omada Industrial Easy Managed Switch
12