TP-Link Omada IES210GPP Quick Start Manual page 26

m
µ
ε
Wall Mounting Requirements
For IES206G/ IES208G/ IES206GPP/ IES210GPP:
To mount the device on a wall, use 4 screws which complies with ANSI B1.1 4# standard and are
more than 10 mm in length. When the screws are fixed on the wall, the distance between the
screw head and the wall should be more than 2 mm.
Disconnection, all power plugs
斷線，所有電源插頭
Switch of mini-gap construction
迷你間隙結構開關
Switch of micro-gap construction (for US version)
Switch of micro-gap / micro-disconnection construction (for other
versions except US)
小間隙結構開關（US 版本）
小間隙 / 小斷開結構的開關（非 US 版）
Switch without contact gap (Semiconductor switching device)
無接觸間隙的開關（半導體開關設備）