Subscribe to Our Youtube Channel
Related Manuals for ADLINK Technology SBC35-MTL
Summary of Contents for ADLINK Technology SBC35-MTL
- Page 1 SBC35-MTL User’s Manual 3.5” Single Board Computer with Intel Core™ Ultra Processor ® Manual Rev.: Rev 1.0 Revision Date: January 2, 2025 Part Number: 50M-47301-1000...
-
Page 2: Environmental Responsibility
Preface Copyright Copyright 2025 ADLINK Technology, Inc. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. -
Page 3: Revision History
SBC35-MTL Revision History Revision Description Date Initial release 2025-01-02 Preface... -
Page 4: Table Of Contents
Table of Contents Preface ..........................ii List of Figures ........................vi List of Tables ........................vii Introduction ........................ 1 Packing List ......................1 Optional Accessories ....................1 Quick Installation ....................... 3 Assembling Passive Heatsink for 15W SKU .............. 3 Assembing Cooler Solution for 28W SKU ..............4 Installing M.2 Expansion Modules ................ -
Page 5: Preface
SBC35-MTL M.2 Key-E ....................... 22 SATA Connector ..................... 23 5.10 SATA Power Connector ..................24 5.11 Fan Connector ......................24 5.12 USB Connector ....................... 24 5.13 SBC-FM Connector ....................25 BIOS Settings ......................27 Menu Structure ....................... 27 Main Menu ......................28 Advanced Menu ...................... -
Page 6: List Of Figures
List of Figures Figure 1: Functional block diagram ..................9 Figure 2: I/O Panel connector locations ................11 Figure 3: Onboard connector locations (Top) ............... 12 Figure 4: Onboard connector locations (Bottom) ..............13 Figure 5: Mechanical dimensions ..................14 Figure 6: Mechanical dimensions –... -
Page 7: List Of Tables
SBC35-MTL List of Tables Table 1: I/O Panel connector definitions ................11 Table 2: Onboard connector definitions (Top) ............... 12 Table 3: Onboard connector definitions (Bottom)..............13 Preface... - Page 8 This page intentionally left blank. viii Preface...
-
Page 9: Introduction
SBC35-MTL 1 Introduction ADLINK SBC35-MTL is a 3.5-inch single board computer powered by Intel® Core™ Ultra processors for efficient, high-performance computing. an integrated NPU to enhance AI processing capabilities and includes a reserved MIPI-CSI signal pathway for easy camera integration, making it ideal for real-time and vision-based applications. - Page 10 This page intentionally left blank. Introduction...
-
Page 11: Quick Installation
SBC35-MTL 2 Quick Installation This chapter covers how to assmelbe cooling solutions and M.2 expansion modules for the ADLINK SBC35-MTL. Assembling Passive Heatsink for 15W SKU 1. Remove the plastic seal from the thermal pad. 2. Assemble and secure the heatsink using the screws provided, as illustrated below. -
Page 12: Assembing Cooler Solution For 28W Sku
Assembing Cooler Solution for 28W SKU 1. Remove the plastic seal from the thermal pad. 2. Assemble and secure the CPU cooler using the screws provided, as illustrated below. Quick Installation... -
Page 13: Installing M.2 Expansion Modules
SBC35-MTL Installing M.2 Expansion Modules M.2 B-key and M.2 E-key share the same mounting hole, please install as illustrated below. Quick Installation... - Page 14 This page intentionally left blank. Quick Installation...
-
Page 15: Specifications
SBC35-MTL 3 Specifications Core System CPU: MTL-U, 15W /MTL-H, 28W Memory: 2x DDR5 SO-DIMMs 5600MHz, up to 96 GB, non-ECC I/O Interface USB: 2x USB 3.2 Gen 2x1 ports (10Gbps) (rear I/O) • 2x USB 2.0 through 30-pin header •... -
Page 16: Power Supply
Power Supply 12V-24V, Reserved DC Jack connector (option) Temperatures Operating Temperature: 0°C to 60°C Storage Temperature: -40°C to 85°C Contact +/- 8kV, Air +/- 12kV 3.10 Certificate (EMC) CE/FCC Class B 3.11 Operating Systems Microsoft® Windows 10/Windows 11 IoT Enterprise LTSC 24H2 ... -
Page 17: Functional Block Diagram
SBC35-MTL 3.12 Functional Block Diagram * Default by BOM change, contact with your local sales to support option. Figure 1: Functional block diagram Specifications... - Page 18 This page intentionally left blank. Specifications...
-
Page 19: Mechanical Layout
SBC35-MTL 4 Mechanical Layout Connector Locations Figure 2: I/O Panel connector locations Table 1: I/O Panel connector definitions IO Panel Connectors Item Description DCIN Connector RJ45*2(I226*2) Type-C Connector DP Connector HDMI Connector USB3.2 Gen. 2x1 *2 Connector Power Button Mechanical Layout... -
Page 20: Figure 3: Onboard Connector Locations (Top)
Figure 3: Onboard connector locations (Top) Table 2: Onboard connector definitions (Top) Onboard Connectors Item Description MIPI Connector eSPI Debug Port SO-DIMM1 DDR5_5.2mm SO-DIMM2 DDR5_9.2mm System Fan Connector I2C Connector (Co-lay SMBus) USB2.0 Connector Mechanical Layout... -
Page 21: Figure 4: Onboard Connector Locations (Bottom)
SBC35-MTL Figure 4: Onboard connector locations (Bottom) Table 3: Onboard connector definitions (Bottom) Onboard Connectors Item Description Wafer for COM1,2 SATA PWR Connector SATA Connector Wafer for GPIO + MIC + Line-In+Line-Out+USB2.0*2 NGF E.Key (PCIe4.0x1, USB2.0*1) eDP*/LVDS Connector SBC-FM FPC Connector NGF M.key (PCIe4.0x4) -
Page 22: Mechanical Dimensions
Mechanical Dimensions 4.2.1 With Passive Heatsink for 15W SKU (ADLINK Part Number: 32-21015-1000-A0) Top View Dimensions: mm Figure 5: Mechanical dimensions Side View Dimensions: mm Figure 6: Mechanical dimensions – I/O panel Mechanical Layout... -
Page 23: Figure 7: Mechanical Dimensions
SBC35-MTL 4.2.2 With Cooler Solution for 28W SKU (ADLINK Part Number: 32-21014-1000-A0) Top View Dimensions: mm Figure 7: Mechanical dimensions Side View Dimensions: mm Figure 8: Mechanical dimensions – I/O panel Mechanical Layout... - Page 24 This page intentionally left blank. Mechanical Layout...
-
Page 25: Connector Pinouts
SBC35-MTL 5 Connector Pinouts Interface Connectors 5.1.1 I2C/SMB Connector Signal P_+3V3_S0 I2C0_CLK_CON I2C0_DAT_CON I2C1_GPIO-L 5.1.2 USB2 Connector Signal P_+5V_A U2_USB8_N U2_USB8_P Connector Pinouts... -
Page 26: Power Input & Dc-In Connector
Power Input & DC-In Connector Input power voltage range: DC 12V~24V Input current: 8A to 12A Suggest Adapter: 100 to 144W (CPU 15W or 28W type) OVP: 28.5V UVP: 7.53V Reverse power protection: Yes Power Header ML 2x2P ST D4.2 DC Power Jack RT Φ2.6 24V/12A Signal... -
Page 27: Gpio/Usb2/Audio Header
SBC35-MTL RS-232/422/485 There are two COM ports on the board. Port 1 and 2 can be set to RS232, 422, or 485 within BIOS. All COM port signals are separated within one wafer connector. Signal Signal GND - CON1_COM_CTS-L CON1_COM_RI... -
Page 28: Key-B
GPIO_S6 GPIO_S1 GND_AUD GPIO_S3 LINL GPIO_S5 LINR GPIO_S7 GND_AUD GND_AUD MIC1L LOUTL MIC1R LOUTR GND_AUD GND_AUD M.2 Key-B The M.2 Key-B connector supports 304 and 3052 two-sized card, and supports 1 Nano SIM. This connector only supports Key-B card, and not B+M card. Signal Signal M2B_CONFIG_3... -
Page 29: Nano Sim
SBC35-MTL C_REFCLK_P5_100M_P PCIE_WAKE_N_3V3 (NC) WWAN_RESET-L (NC) UIM_DET M2B_CONFIG_1 P_+3V3_NGFF_B P_+3V3_NGFF_B M2B_CONFIG_2 P_+3V3_NGFF_B Nano SIM Signal P_UIM_PWR UIM_RST UIM_CLK UIM_DATA M.2 Key-M M.2 Key-M 2280 connector supports PCIe Gen4 Signal Signal P_+3V3_M.2_M P_+3V3_M.2_M X_PCIE4_P12_RX_N X_PCIE4_P12_RX_P M2M_LED X_PCIE4_P12_TX_N P_+3V3_M.2_M X_PCIE4_P12_TX_P P_+3V3_M.2_M P_+3V3_M.2_M X_PCIE4_P11_RX_N P_+3V3_M.2_M... -
Page 30: Key-E
X_PCIE4_P10_RX_N X_PCIE4_P10_RX_P X_PCIE4_P10_TX_N X_PCIE4_P10_TX_P PCH_SATA_DEVSLP0 (NC) X_PCIE4_P9_RX_N X_PCIE4_P9_RX_P X_PCIE4_P9_TX_N X_PCIE4_P9_TX_P PCH_PLTRST-L_BUF CLKREQ_P3_SSD_N C_PCIECLK_P3_100M_N PCIE_WAKE_N_3V3 (NC) C_PCIECLK_P3_100M_P M2M_CONFIG_1 P_+3V3_M.2_M P_+3V3_M.2_M P_+3V3_M.2_M M.2 Key-E M.2 Key-E connector supports 2230-size card. Signal Signal P_+3V3_M.2_E U2_USB0_P P_+3V3_M.2_E U2_USB0_N Connector Pinouts... -
Page 31: Sata Connector
SBC35-MTL X_PCIEX1_P7_TX_P X_PCIEX1_P7_TX_N X_PCIEX1_P7_RX_P X_PCIEX1_P7_RX_N C_PCIECLK_P4_100M_P C_PCIECLK_P4_100M_N CLKREQ_P4_WIFI_N PCH_PLTRST-L_BUF PCIE_WAKE_N_3V3 (NC) BT_DISABLE# WIFI_DISABLE# P_+3V3_M.2_E P_+3V3_M.2_E SATA Connector Signal Signal SATA3_P1_RX_N SATA3_P1_TX_P SATA3_P1_RX_P SATA3_P1_TX_N Connector Pinouts... -
Page 32: Sata Power Connector
5.10 SATA Power Connector Signal Pin1 P_+5V_S0 5.11 Fan Connector This connector is for system FAN design requirements. FAN speed is based on the RT2 sensor resistor, which detects the board temperature. Please refer to the RT2 location below. Signal Pin1 P_+5V_S0 FAN_FG (FAN TACH) -
Page 33: Sbc-Fm Connector
SBC35-MTL 5.13 SBC-FM Connector SBC-FM connector is reserved for I/O expansion flexibility through FPC. Manufacturer: HIROSE MFG P/N: FH34SRJ-50S-0.5SH ADLINK P/N: 61-02010-0500 Location: FPC1 SBC-FM Connector Pin Definition Describe Signal Pin# Pin# Signal Describe PCIE4 X_PCIEX4_P16_TX_P CLKREQ_P2_FM_N PCIE3 CLK Request... - Page 34 MFG P/N: 24W1125A-04M00-06S10-01T ADLINK P/N: 61-6AJ0X-1060 Location: FM_PWR Signal Pin1 P_+VIN_S (Standby) Connector Pinouts...
-
Page 35: Bios Settings
SBC35-MTL 6 BIOS Settings Menu Structure This section presents the primary menus of the AMIBIOS EFI BIOS setup utility. Use the following table as a quick ® reference for the contents of the BIOS Setup Utility. The subsections describe the submenus and options for each menu item. -
Page 36: Main Menu
6.2 Main Menu Upon entering the BIOS Setup Utility, the Main Menu is displayed, providing read-only information about your system and also allows you to set the System Date and Time. Refer to the tables below for details of the submenus and settings. -
Page 37: Advanced Menu
SBC35-MTL Advanced Menu This menu contains the settings for most of the user interfaces in the system. Feature Option Description ► CPU Configuration CPU Configuration ► Power Management System ACPI Parameters ► Serial Console Redirection Serial Console Redirection ► USB Configuration USB Configuration Parameters ►... - Page 38 6.3.1 Advanced > CPU Configuration Feature Option Description ► Efficient-core Information Displays the E-core Information. *Note1 ► Performance-core Displays the P-core Information. *Note1 Hyper-threading Enabled Enable or Disable Hyper-Threading Technology Disabled Active Performance-cores The number of P-cores to enable in each processor package.
- Page 39 SBC35-MTL 6.3.2 Advanced > Power Management Feature Option Description ACPI Sleep State Suspend Disabled Select the highest ACPI sleep state the system will S3 (Suspend to RAM) enter when the SUSPEND button is pressed. Note: For MTL, 'Active SOC-North Efficient-cores' will change to...
- Page 40 Stop Bits Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning). The standard setting is 1 stop bit. Communication with slow devices may require more than 1 stop bit. Flow Control None Flow control can prevent data loss due to buffer overflow.
- Page 41 SBC35-MTL 6.3.4 Advanced > USB Configuration Feature Option Description XHCI Hand-off Enabled Enable/Disable USB Mass Storage Driver Support Disabled USB Mass Storage Driver Enabled Enable/Disable USB Mass Storage Driver Support Support Disabled USB transfer time-out The time-out value for Control, Bulk, and Interrupt 20 sec transfers.
- Page 42 6.3.6 Advanced > Onboard Devices Configuration Feature Option Description COM1 Mode Control RS232 Select COM1 mode. RS232, RS422, RS485 RS422 RS485 COM1 TX termination Disabled COM1 TX termination Enable/Disable Enabled COM1 RX termination Disabled COM1 RX termination Enable/Disable Enabled COM2 Mode Control RS232 Select COM1 mode.
- Page 43 SBC35-MTL 6.3.8 Advanced > BIOS Watchdog Timer Feature Option Description BIOS POST Watchdog Disabled 1. Disable: Disables WatchDog Timer; 2. Second Mode: Enables Watchdog Timer in second mode; 3. Second Mode Minute Mode: Enables Watchdog Timer in minute Minute Mode mode.
-
Page 44: Chipset
Chipset Feature Option Description ► System (SA) Configuration System Agent (SA) Parameters ► PCH-IO Configuration PCH Parameters 6.4.1 Chipset > System Agent (SA) Configuration Feature Option Description ► Memory Configuration Memory Configuration Parameters ► Graphics Configuration Graphics Configuration VT-d VT-d Capability Enabled Disabled NPU Device (B0:D11:F0) -
Page 45: Security
SBC35-MTL Security Feature Option Description Administrator Password Set Administrator Password User Password Set User Password ► Secure Boot menu Secure Boot Configuration ► Security Configuration Security Configuration Settings 6.5.1 Security > Secure Boot Menu Feature Option Description Secure Boot Control... - Page 46 USB CD/DVD USB Key USB Floppy USB Lan Network Disabled Boot Option #3 Sets the system boot order UEFI AP Hard Disk NVME CD/DVD USB Hard Disk USB CD/DVD USB Key USB Floppy USB Lan Network Disabled Boot Option #4 Sets the system boot order CD/DVD Hard Disk...
- Page 47 SBC35-MTL Network Disabled Boot Option #7 USB CD/DVD Sets the system boot order Hard Disk NVME UEFI AP CD/DVD USB Hard Disk USB Key USB Floppy USB Lan Network Disabled Boot Option #8 USB Key Sets the system boot order...
-
Page 48: Save & Exit
Save & Exit Feature Option Description Save Changes and Exit Exit system setup after saving the changes. Discard Changes and Exit Exit system setup without saving any changes. Save Changes and Reset Reset the system after saving the changes. Discard Changes and Reset Reset the system without saving any changes. -
Page 49: Safety Instructions
SBC35-MTL Safety Instructions Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and operating instructions for future use. Please read these safety instructions carefully. • Please keep this User‘s Manual for later reference. -
Page 50: Getting Service
6450 Via Del Oro, San Jose, CA 95119-1208, USA Tel: +1-408-360-0200 Toll Free: +1-800-966-5200 (USA only) Fax: +1-408-600-1189 Email: info@adlinktech.com ADLINK Technology (China) Co., Ltd. Address: 300 Fang Chun Rd., Zhangjiang Hi-Tech Park, Pudong New Area Shanghai, 201203 China Tel: +86-21-5132-8988 Fax: +86-21-5132-3588 Email: market@adlinktech.com...
Need help?
Do you have a question about the SBC35-MTL and is the answer not in the manual?
Questions and answers