EBERTH GG4-JS7200 Instruction Manual page 71

Disconnecting Power Consumers
Set the switch (p.17 fig.5 (25)) to "OFF".
●
Remove the consumers
●
Stopping Device
Stop the motor by setting the on-off switch (p.17 fig.5 (16)) to "OFF".
●
If the unit is to be stored for a longer period of time, it is
recommended to drain the carburettor. To do this, follow steps 1 to 3
in chapter "Draining the fuel tank" p.33.
Cleaning, Care and Maintenance
General Cleaning and Care
Clean all external surfaces of the appliance regularly with a damp cloth.
●
damp cloth.
●
Rub the surfaces dry.
●
If dirt particles are lodged in inaccessible places, especially in ventilation slots
●
and cooling fins, blow the unit free with blasts of compressed air.
Check whether moving parts function properly and are not jammed, and whether
●
parts are broken or damaged in this way.
28