Output Configuration - K-array Thunder-KS I User Manual

Output Configuration

Under the Factory menu, the Output Configuration allows to
configure the Thunder-KS' amplifier output channels with the
proper loudspeaker factory preset.
In order to drive the built-in transducer, the default Thunder-KS
loudspeaker factory preset is loaded on the output channel 2.
The amplifier module output channels shall be properly
configured to drive other passive loudspeakers: the loudspeaker
factory presets are available for K-array and KGEAR products.
The subwoofer crossover frequency depends on the
loudspeaker type and model connected to the Thunder-KS
speaker output channel: select the proper loudspeaker factory
preset in the match field in output channel 2.
Thunder-KS I
INPUT PATCH and MATRIX
The Routing menu provides access to the INPUT PATCH and the
MATRIX.
The INPUT PATCH provides to route the physical connections to
the DSP input channels. The DSP manages the signal before the
amplifier output stage.
The Matrix provides to route the DSP outputs to the amplifier
module physical speaker output connectors.
USER GUIDE
17