K-array Thunder-KS I User Manual page 18

Thunder-KS I
USER GUIDE
Device Web App
Once connected to the Thunder-KS built-in Wi-Fi hotspot, the
active subwoofer can be remotely managed via its Web App.
The Web App is stored into the device and is the user interface
of the K-array osKar operating system and DSP.
Use the web browser on your mobile device to access the Web
App on the device default Wi-Fi IP address 192.168.0.1.
The Web App can be opened on every web browser (Google
Chrome recommended) either over a wireless connection on
mobile device and a wired connection on personal computer.
In order to access the device Web App type the device IP
address on the web browser address bar.
The Web App menu gives access to the device settings: the
dashboard collects the main features ad comprises a media
player that can stream audio from either a usb device, a remote
cloud storage or Dante.
16
Media Player
The Thunder-KS active subwoofer built-in DSP implements a
media player that can be used to playback audio from digital
sound sources.
By default the media player lists the audio files saved on any
USB drive connected on the rear panel USB ports and routes the
sound to the DSP input channels IN1 and IN2.
The media player's output channels are shows in the INPUT
PATCH, providing to route the digital signals from the media
player to any DSP input channels.
When Dante is active, in order to route the Dante stream to
the output channels, the media player shall be used and set to
Dante Ready.
Dante
osKar
USB
Digital streaming
The media player's MEDIA INs can receive the signals form the
input connectors (XLR1, XLR2, AES3), providing to route these
signals to DANTE.
MEDIA
IN1 IN2 IN3 IN4
XLR 01 GAIN
XLR02 GAIN
AES L GAIN
AES R GAIN
Media OUT1 GAIN
Media OUT2 GAIN
INPUT GAIN INPUT PATCH
Media IN1
Media IN2
MEDIA
IN1 IN2