Table of Contents
Advertisement
Output configuration
Once connected to the Thunder-KS active subwoofer (see
paragraph "K-array Connect Mobile App", page 8) the
output configuration can be performed either using the
on-board web interface or with the K-array Connect app, as
described below.
A. Touch the Preset tab in the tab menu at the bottom
of the screen: this will modify the buttons in the list of
available devices.
B. Select the device you want to configure and touch the
button to enter the Output Configuration page.
C. In the Output Configuration page fill in the field according
to the actual loudspeakers configuration: match the
loudspeakers models and quantities connected to the
Thunder-KS SpeakON output connectors.
D. Once completed, save the output configuration
touching the APPLY button at the bottom of the page.
Signal Routing
The Thunder-KS active subwoofer features two analog
inputs on channels 1 & 2, two digital inputs on channels
3 & 4 and four freely assignable audio power outputs. The
internal transducer is wired in parallel to the output channel 2
(see paragraph "Connectivity", page 4 for details). Signal
routing can be configured either with the on-board web app
or with the K-array Connect app, as described below.
1. Touch the Routing tab in the tab menu at the bottom
of the screen: this will modify the buttons in the list of
available devices.
2. Select the device you want to configure and touch the
button to enter the Routing table page.
3. Touch the squares in order to toggle the connection
among the input channels on the left side to the output
channels in the top side.
4. If needed, toggle the input channel 2 XLR connector
analog or AES3 (see "AES3 Digital Input", page 8).
P R E L I M I N A R Y
Thunder-KS
User Guide
IN1 routed to OUT1
IN1 not routed to OUT1
11
Advertisement
Table of Contents
