K-array Thunder-KS I User Manual page 13

Thunder-KS Digital Input
The Thunder-KS I active subwoofers accept AES3 digital signals
(2-channel stream) and optionally a Dante® stream (up to two
input channels).
AES3 Input
In order to feed the subwoofer with an AES3 digital signal, the
XLR CH2 input connector shall be toggled
to AES3 via software (K-array Connect or
K-framework3).
The AES3 digital input signals are routed
internally to the input channels 3 and 4 and
mirrored to the AES3 OUT XLR connector.
Dante Input
The Thunder-KS I are DanteReady™ devices. By default Dante
is not active: end-users may purchase and add two Dante input
channels to the Thunder-KS I after initial purchase.
The Audinate Dante Controller (version 4.5.0 or later) includes
the Dante Ready Activator that manages the purchase and
activation.
After purchase and activation, the Dante
AES3
OUT
license is transferred to the Thunder-KS I active
AES3
IN
subwoofer and retained by its DSP.
The Dante stream can be fed to the Thunder-KS I
via the RJ45 Ethernet Port on the back panel.
Thunder-KS I
USER GUIDE
AES3
OUT
AES3
IN
11