Icom IC-7760 Addendum page 3

Controller and RF deck connection
Changed
D About the Connection route and IP connection between the controller and RF deck
Connecting through LAN
LAN (in Same Segment):
The controller and RF deck are in the same segment.
L All 3 IP addresses are used for the connection.
Controller
IP Address (LAN) IP Address (LAN)
IP Address (Controller) IP Address (Controller)
LAN (from Different Segment):
The controller and RF deck are connected between different segments.
L The RF deck cannot obtain a dynamic IP address from the DHCP server. Ask the network administrator for the network
settings.
L The controller and RF deck cannot be connected if NAT/IP masquerading or a packet filter is used on a router.
* Set the RF deck's static IP address that is displayed after "Connection Route" is changed.
» SET > Network > Controller Connection (via LAN) > RF Deck side Settings
MENU
Controller
IP Address (LAN) IP Address (LAN)
IP Address (Controller) IP Address (Controller)
[RF DECK]
Network switch Network switch
Network switch Network switch
[RF DECK]
Network switch Network switch
3
INTERNET INTERNET
Router Router
RF deck
[LAN]
[CONTROLLER]
INTERNET INTERNET
Router Router
RF deck
[LAN]
[CONTROLLER]
V1.10
IP Address (RF Deck) IP Address (RF Deck)
RF Deck side Settings* > RF Deck side Settings* >
IP Address (RF Deck) IP Address (RF Deck)