Chapter 5: Maintenance And Troubleshooting; Inserting A Battery - EPS Bio Technology EASYMAX Tag User Manual

Chapter 5: Maintenance and Troubleshooting

Inserting A Battery

meter will turn off automatically. Or you can press and hold power button to turn your meter off.
1. The meter won't delete earlier records after you replace a battery.
2. You should reset the time and date again after you replace the battery. See Section
"Setting the time and date" in Chapter 1.
3. CR2032 x 1 battery is available at most stores. You may take the old battery with
you for replacement.
4. Remove a battery when you will not be using the meter for one month or more.
The meter uses one CR2032 Lithium battery. A battery will normally last
for more than 1000 tests. Other types of CR2032 Lithium batteries are
also acceptable, but the capacity of test times may differ. Install the
battery when you first use the meter or replace with a new battery when
the "LP" (low power) message and the low battery symbol appear on the
display.
The meter will not turn on the first time a battery is inserted. Please press
and hold power button or insert the test strip to turn your meter on. The
Low battery symbol
41