EPS Bio Technology EASYMAX Tag User Manual page 29

4. Place the lancing device
against the pad of your finger.
Press the trigger button to
activate the lancing device.
5. Gently squeeze and/or
massage your fingertip until a
round drop of blood on your
fingertip.
Do not apply blood on
Apply blood to the
top of the test strip.
edge of the test strip.
Be sure to get Not enough
enough blood on strip blood on strip to
to make it to the
get a test result.
confirmation window.
6. Touch the blood drop at the
tip of the transparent
window of the test strip. Do
not put blood on top of
the strip. Be sure to get
enough blood on the strip's
reaction zone. Otherwise,
an inaccurate reading may
result.
7.
The meter will beep when enough
blood has entered the strip's
reaction zone. The result will
appear on the display after 5
seconds. Press Left & Right
button to set and confirm
mode.
8. Remove the test strip and the
meter turns off automatically.
or
29