EPS Bio Technology EASYMAX Tag User Manual page 38

Chapter 4: Meter Memory, Setup
Memory, Storing Test Results
Your meter stores a maximum of 880 test results with the time and date of the test. You can
review them at any time. When the memory is full, the oldest result is dropped as the newest is
added, so it is very important to have the correct time and date set in the meter.
Meter Setup - Using The Setting Mode
By using the set mode, you can personalize your meter to suit your needs. Here are the features
you can customize —
Time and Date — to set the time and date (see Chapter 1).
1. Do not change your therapy based on one individual result in memory.
2. The memory is not lost when you replace the battery. You do need to check that the
time and date are still correct. See Section "Setting the time and date" in Chapter 1.
3. Once 880 results are in memory, adding a new result causes the oldest one to be
deleted.
4. Control solution values will be included in the memory, but NOT in average values.
38