EPS Bio Technology EASYMAX Tag User Manual page 21

Running A Control Solution Test
You need the meter, a test strip, and control solution.
1. Put a test strip into the meter in
the direction of the arrow and
the icon of
 Do not put control solution on top of the test strip.
 EASYMAX® Tag Meter will automatically identify your control solution test,
so that results will be included in the memory of blood test, but NOT in
2. Wipe the tip of the bottle with a
tissue. Squeeze the bottle until a
tiny drop forms at the tip of the
control solution cap.
3. Touch the drop to the collection
area at the end of the test strip.
shows itself.
4. When the icon of
shows, the meter beeps,
you have enough control
solution for the test.
5. The meter starts to count
down from 5 seconds.
21