Setting The Date, Time and Glucose Level Alarm (High Range Limit)
Setting the testing unit and glucose level alarm in your meter is important to review your testing
results.
4. Repeat step 2 to set the date.
The flashing field is the one
you are currently setting.
The meter is pre-set with a low limit of 70 mg/dL and a high limit of 140 mg/dL. The
low limit is fixed. If you need to edit the pre-set high limit, check step 5, page 17.
5. Repeat step 2 to set the
high range limit. The
flashing field is the one
you are currently setting.
6. The icon of
on the display. The meter
is ready to run the test.
flashes
17
Need help?
Do you have a question about the EASYMAX Tag and is the answer not in the manual?
Questions and answers