NewTek NT-77HSDC07 Instruction Manual page 31

Model
NT-77HSDC07, NT-77HSDC09,
NT-77HSDC12
NT-77HSDC18
NT-77HSDC24
8. DISPOSAL
Upon expiry of its service life the appliance can be
disposed of separately from ordinary domestic waste.
You can turn it over to a specialized electric and
electronic appliance disposal and recycling centre.
9. CERTIFICATION DATA, GUARANTEE
The service life of this item is 10 years since the date
of sale to the end user, provided the item will be used
in strict accordance with the present manual and the
applicable technical standards. Upon expiry of the
service life please contact the nearest authorized
service centre for suggestions as to further operation
of the appliance. The manufacturing date of the
appliance is integrated into the serial number (digits
2 and 3 - year, digits 4 and 5 - month of manufacture).
If any questions related to appliance maintenance
should arise, or if the appliance has malfunctions,
apply to the NEWTEK TM Authorized Service Center.
The address of the service center can be found on
the website https://newtek.ru/servis. Service support
contacts: Phone: +7 (988) 24-00-178. General Service
Center: OOO "Larina-Servis", Krasnodar, Phone: +7
(861) 991-05-42.
The product is provided with the Certificate of
Conformity.
10. MANUFACTURER AND IMPORTER INFORMATION
Manufacturer: Hisense International Co., Ltd. Address:
No. 218 Qianwangang Road, Qingdao Economic &
Technological Development Zone, China. Imported to
EAEU by: Individualniy Predprinimatel Asrumyan Karo
Shurikovich. Address: Russia, 350912, Krasnodar, ul.
Atamana Lysenko, 23, pgt. Pashkovskiy. Phone: +7
(861) 2-600-900.
CABLE SPECIFICATIONS
Cable diameter, mm²
Connec-
Power
ting
NT-77HSDC07, NT-77HSDC09,
1.0 1.0
2.5 1.5
2.5 2.5
DEAR VALUED CONSUMER!
The guarantee period for all appliances amounts to
36 months since the date of sale to the end consumer.
With this Warranty Card the Manufacturer confirms
the proper condition of the appliance and undertakes
to repair, free of charge, all defects caused by the
Manufacturer's default.
GUARANTEE MAINTENANCE TERMS
1. The guarantee shall be valid if the following
– The original Warranty Card shall be filled out
2. The guarantee shall be valid if the following
– the appliance is used in strict accordance with the
– the safety rules and requirements are observed.
3. The guarantee does not apply to regular
maintenance, cleaning, installation and setup of
the appliance at the owner's location.
4. The guarantee does not apply in the following
– mechanical damage;
– normal wear of the appliance;
– non-observance of operation requirements or
Model
NT-77HSDC12
NT-77HSDC18
NT-77HSDC24
documentation conditions are observed:
correctly and clearly, indicating the of appliance
model, serial number and sale date, the stamp
of the seller company and signature of its
representative shall be available, as well as the
stamps on each coupon and the buyer's signature in
the Warranty Card. The Manufacturer reserves the
right to reject guarantee maintenance if the buyer
fails to provide the abovementioned documents or
if the information contained therein is incomplete,
illegible or ambiguous.
operation conditions are observed:
present manual;
cases:
erroneous actions on the part of the user;
The power of the fuse /
circuit breaker, A
indoor outdoor
unit unit
3.15/5 15
3.15/5 20
3.15/5 30
30