Multiple Ways Of Viewing The Log; Compaq Insight Manager - Compaq 124708-001 - ProLiant Cluster - 1850 Software User's Manual

4-2 Compaq ProLiant CL1850 Software User Guide

Multiple Ways of Viewing the Log

Compaq Insight Manager

You can view an event in the Compaq Integrated Management Log two ways:
From within Compaq Insight Manager
From within Compaq Survey Utility
Compaq Insight Manager is a server management tool providing in-depth
fault, configuration, and performance monitoring of hundreds of Compaq
servers from a single management console. The system parameters that are
monitored describe the status of all key server node components.
By being able to view the events that occur, you can take immediate action.
You can view and print the event list from within Compaq Insight Manager by
following the instructions below. You can also mark a critical or caution event
as repaired after the affected component has been replaced, for example, if a
fan that has failed has been replaced. You can lower the severity of the event
by marking it as repaired.
Viewing the Event List
1. From Compaq Insight Manager, select the appropriate server node; then
select View Device Data.
The selected server node is displayed with buttons around its perimeter.
2. Select the Recovery button.
3. Select Compaq Integrated Management Log.
NOTE: You can only view the list from the Recovery/Integrated Management screen. To
print the list, follow the instructions in the following section.
4. If a failed component has been replaced, select the event from the list
and then select Mark Repaired.