3. From the Main window, click Physical Drive, then click New.
4. The Add New Physical Drive Window appears. Enter the channel
number and Target ID for the new physical drive. The Target ID is
displayed on the grid.
NOTE: An alternate method for adding drives is to click on an empty cell in the grid, then
right click and select New. This presents the Add New Physical Drive window with the
channel number and target ID currently assigned.
5. Click the OK button. The program adds your physical drive to your
configuration and refreshes the main screen.
Adding Logical Drives
From the Storage pull-down menu, select Add Logical Drive. There is a
six-step Wizard to assist you in adding a logical drive.
1. Select the RAID level for the new logical drive (Figure 3-14). Click the
Next button to continue.
Figure 3-14. Add Logical Drive: Step 1
CR3500 Configuration Utility 3-19