Verifying Functionality of the Cluster
Now that the software is installed, you can verify the creation of the cluster
from the NHAS Console. All three links under Connection Status will show
Connected. See Figure 2-1.
Figure 2-1. NHAS: Connected
Verifying Direct and NetWare Links
To test Direct Link Disconnect:
1. Remove the network cable from the server's network card to which
Direct Link is dedicated. The Direct Link status on the NHAS screen
should change from Connected to Not Connected.
2. Reconnect the network cable to the network card. The Direct Link status
should change from Not Connected to Connected.
System Setup and Configuration for Novell NetWare 2-7