Error And Warning Messages - Compaq 124708-001 - ProLiant Cluster - 1850 Software User's Manual

3. Install the redundant controller in the bottom controller slot of the
shared storage subsystem.
4. Power up the shared storage subsystem.
5. Restore the controller configuration settings that you saved in Step 1.
NOTE: If restoring configuration settings using a serial connection, both controllers must
be attached to the host machine.

Error and Warning Messages

When you start the CR3500 Configuration Utility, the software checks each
controller to detect errors in its configuration. If a problem is found, the
CR3500 Configuration Utility displays an error warning message that
describes the problem.
IMPORTANT: If a warning message indicates " Internal Error Has Been Detected" and
cites an error code number, the problem requires assistance from Compaq technical
support. See the " About This Guide" section at the beginning of this book for technical
support phone numbers.
Refer to the Online Help for more information.
CR3500 Configuration Utility 3-29