Compaq 124708-001 - ProLiant Cluster - 1850 Software User's Manual page 52

CR3500 Configuration Utility 3-21
3. Add the capacity for the logical drive (Figure 3-16).
Figure 3-16. Add Logical Drive: Step 3
To create a single logical drive using the total capacity available, click
Add. The capacity remaining changes to 0. The new logical drive will
appear in the bottom window, along with its capacity size. Click Next to
continue.
To create more than one logical drive, enter a number less than the
amount appearing in the Logical Drive Capacity window and click Add.
The capacity remaining changes to reflect the new amount of capacity in
use. Repeat this step if you want to create another logical drive, or click
Next to continue.