Compaq 124708-001 - ProLiant Cluster - 1850 Software User's Manual page 43

3-12 Compaq ProLiant CL1850 Software User Guide
The CR3500 Configuration Utility uses icons to indicate the status of the disks
in the disk window. The physical drive states and corresponding icons are
shown in Table 3-5.
Drive State Icon
Good
Reconstructing
Spare
Failed
Available
Icons representing the Shared Storage RAID controllers are arranged just
below the physical drives. The utility uses icons to indicate the status of your
controllers, as shown in Table 3-6.
Controller Status Icon
Table 3-5
Physical Drive States
State
Physical drive is operating normally as part of a
logical drive.
Reconstruction data is being written to this
physical drive.
Physical drive is available to replace a failed
physical drive that is a group member.
Physical drive is not available but is installed.
Physical drive is available for use in a logical
drive or as a spare.
Table 3-6
Controller status
Description
Indicates an operational controller
Indicates a controller that is not operational
Description