Dahua Technology WizSense IPC-HFW3441E-SA Operation Manual page 200

Step 2 Select the Enable check box to enable the heat map function.
Step 3 Set the arming period. For details, see "5.1.1.1 Setting Period".
Step 4 Click Save.
5.13.2 Viewing Heat Map Report
The system can export heat map data as a report.
Step 1 Select Setting > Event > Heat Map > Report.
Step 2 Set the start time and end time.
Only some devices support heat map sequence numbers.
Step 3 Click Search to complete the report.
Click Export to export the statistical report.
5.14 Setting Vehicle Density
Configure the rules for traffic congestion and parking upper limit, and view the counting data on the
Figure 5-68 Heat map
Figure 5-69 Heat map report
187
Operation Manual