Dahua Technology WizSense IPC-HFW3441E-SA Operation Manual page 145

2. Select a day, and the alarm type next to a period. Then set the period.
3. You can set 6 time periods per day.
Step 3 Click Save.
5.1.1.3.2 Setting Snapshot Linkage
On the alarm event setting interface (such as the motion detection interface), select Snapshot and
set alarm linkage snapshot.
5.1.1.4 Relay-out Linkage
When an alarm is triggered, the system can automatically link with relay-out device.
On the alarm event setting interface (such as the motion detection interface), select Alarm and set
Alarm Delay.
When alarm delay is configured, alarm continues for an extended period after the alarm ends.
5.1.1.5 Email Linkage
When an alarm is triggered, the system will automatically send an email to users.
Email linkage takes effect only when SMTP is configured. For details, see "4.6.5 SMTP (Email)".
Figure 5-8 Setting (snapshot time period)
Select All or check boxes of some days to set the time period of multiple days at
◇
one time.
You can set 6 time periods per day.
◇
The Snapshot interface is displayed.
Figure 5-9 Snapshot linkage
Figure 5-10 Relay-out linkage
132
Operation Manual