Dahua Technology WizSense IPC-HFW3441E-SA Operation Manual page 183

Click Search, and the face details are displayed. Click to view the face picture in list
format. See Figure 5-50. Click to view the face picture in thumbnail format. See Figure
5-51.
◇
◇
5.10.3 Setting Face Recognition Alarm Linkage
When face recognition succeeded or failed, the device links alarm out.
Step 1 Select Setting > Event > Face Recognition > Alarm.
Figure 5-49 Failed modeling
When the modeling status is Valid in the list or is displayed on the left corner of the
thumbnail, it means the modeling succeeded.
When the modeling status is Invalid in the list or is not displayed on the left corner
of the thumbnail, it means the modeling failed. Point to the modeling status in the
list or the pictures without to view the details of the failure. Change the pictures
according to the details.
Figure 5-50 Modeling status (list)
Figure 5-51 Modeling status (thumbnail)
170
Operation Manual