Dahua Technology WizSense IPC-HFW3441E-SA Operation Manual page 181

5.10.2.3.1 Modifying Face Information
Go to the Face Database Config interface, set filtering condition as needed, and click
Step 1
Search.
The search result is displayed.
Step 2 Select the row where the face picture or the personnel information is located, and then
click
Step 3 Modify face information according to the actual need. Click Add to task list.
Step 4 Click
5.10.2.3.2 Deleting Face Picture
Go to the Face Database Config Interface, and delete the created face picture.
● Single delete: Select the row where the face picture or the personnel information is located, and
click or
● Batch delete: Select
the personnel information is located. Select the information, click Add to Deletion List,
and then click OK to delete the selected face picture.
● Delete all: When viewing face pictures in a list, click
located; when viewing by thumbnail, select All to select all face pictures. Click Add to Deletion
List,
5.10.2.4 Face Modeling
Face modeling extracts face picture information and imports the information to a database to
establish relevant face feature models. Through this function, the face recognition and other
or .
Figure 5-46 Face information modification
, and then click OK.
to delete the face picture.
at the upper right corner of the face picture or
, and then click OK to delete all face pictures.
of the row where the serial number is
168
Operation Manual
of the row where
,