Canon imagePROGRAF iPF755 Service Manual page 14

VI. Servicing Notes
A. imagePROGRAF iPF755/iPF750 Power and Plug Requirements
Canon USA strongly suggests dedicated and properly grounded outlets be
provided for these devices. Before installation, confirm that a NEMA 5-15R
outlet is available to power the imagePROGRAF iPF755/iPF750. It is not
necessary to have a dedicated line however, Canon USA suggests that no
other electrical equipment utilize the same power line when the printer is in
use.
Power and Plug Requirements (Table 4)
B. Installation Space Requirements
Canon USA recommends that service personnel perform the installation. Four
(4) or more persons are necessary to unpack and move the printer. Two (2)
or more persons are necessary to install the printer.
Refer to the iPF750 Series Service Manual for details on transportation and
installation of the imagePROGRAF iPF755/iPF750.
The approximate space requirements for the imagePROGRAF iPF755/iPF750
installation are shown below.
imagePROGRAF iPF755/iPF750 Installation Space Diagram (Table 5)
imagePROGRAF iPF755/iPF750 Service Guide
Rev. 1
Height and Depth
Space Above
14.0" (356 mm)
Space in Front
23.62" (600 mm)
imagePROGRAF iPF755/iPF750 Service Guide
Main Unit
Nema 5-15R
Depth
34.25" (870 mm)
May 2009
Page 9