Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Agora Models Manuals
  4. Motorized Toy Car
  5. JAMES BOND NO TIME TO DIE ASTON MARTIN DB5
  6. Build instructions

Agora Models JAMES BOND NO TIME TO DIE ASTON MARTIN DB5 Build Instructions

Pack 12
Hide thumbs

Advertisement

Quick Links

Download this manual
Pack 12
B U I L D
I N S T R U C T I O N S
STAGE 093: AT TACHING THE
STAGE 097: BUILDING THE LEFT
REAR BUMPER
HEADLIGHT AND MINIGUN
STAGE 094: ATTACHING THE
STAGE 098: INSTALLING THE LEFT
FRONT BUMPER
HEADLIGHT AND MINIGUN MECHANISM
STAGE 095: BUILDING THE RIGHT
STAGE 099: BUILDING THE
HEADLIGHT AND MINIGUN
REMOTE CONTROL
STAGE 096: INSTALLING THE RIGHT
STAGE 100: ATTACHING THE CHASSIS
HEADLIGHT AND MINIGUN MECHANISM
AND BODY
NO TIME TO DIE © Danjaq, LLC and Metro-Goldwyn-Mayer Studios Inc. NO TIME TO DIE,
and related James Bond Indicia © 1962-2024 Danjaq, LLC and
Metro-Goldwyn-Mayer Studios Inc. NO TIME TO DIE,
and related James Bond Trademarks are trademarks of Danjaq, LLC. All Rights Reserved.
Aston Martin, the Aston Martin Wings logo and the model name "DB5" are trademarks owned, licensed
or used by Aston Martin Lagonda Limited. All Rights Reserved.

Advertisement

loading
Need help?

Need help?

Do you have a question about the JAMES BOND NO TIME TO DIE ASTON MARTIN DB5 and is the answer not in the manual?

Questions and answers

Related Manuals for Agora Models JAMES BOND NO TIME TO DIE ASTON MARTIN DB5

Summary of Contents for Agora Models JAMES BOND NO TIME TO DIE ASTON MARTIN DB5

  • Page 1 Pack 12 B U I L D I N S T R U C T I O N S STAGE 093: AT TACHING THE STAGE 097: BUILDING THE LEFT REAR BUMPER HEADLIGHT AND MINIGUN STAGE 094: ATTACHING THE STAGE 098: INSTALLING THE LEFT FRONT BUMPER HEADLIGHT AND MINIGUN MECHANISM STAGE 095: BUILDING THE RIGHT...
  • Page 2 Advice from the experts Spare screws are included with each part. Occasionally, you may be instructed to keep spare or unused screws for a later stage. Keep these spares in a safe place and label them correctly. Please make sure you don’t mix up the screws. They look quite similar, but the threads do vary slightly.
  • Page 3 Number Plate Options: LED or Non-LED You have two options for the number plates on your model – the changing LED number plates or the non-LED versions. If you have chosen to fit the LED version in stage 092 you can continue to stage 093 on page 7. If you have chosen the non-LED version, you can find the parts in Stage 100.
  • Page 4 Attaching the Non-LED Rear Number Plate PS03 Take the rear number plate light assembly (stage Secure from inside with 2x PS03 screws (from 089) and press it into the two upper holes in the stage 092). boot lid (stage 091). Push the rear number plate (100-F) into the boot Align the circuit board mount (stage 092) with lid.
  • Page 5 Attaching the Non-LED Rear Number Plate PS14 Screw the circuit board mount to the rear Take the number plate stickers (100-G). Choose number plate with a PS14 screw (stage 092). one of the stickers to use from the sheet marked “Rear”...
  • Page 6 Attaching the Non-LED Rear Number Plate DS11 Place the main body upside down on your work Position the boot lid against the body and screw surface then align the boot lid with the hinges. it to the hinges using 4x DS11 screws (stage 092). S T A G E C O M P L E T E AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 7 Stage 093: Attaching the Rear Bumper In this stage you will attach the rear bumper. S T A G E 0 9 3 P A R T S L I S T Name 93-A Rear bumper 93-B Left overrider 93-C Right overrider 93-D Rear bumper reflector x2 PS01 screws x5 PS20 screws x3...
  • Page 8 Stage 093: Attaching the Rear Bumper Push one of the rear bumper reflectors (93-D) Push the second rear bumper reflector into the into the rear bumper (93-A). The reflector is other side. shaped so it will only go in one way. PS01 PS01 Screw the reflectors to the rear bumper with 2x PS01 screws.
  • Page 9 Stage 093: Attaching the Rear Bumper Take the rear left overrider (93-B). It has “R L” Push the rear left overrider into the rear bumper. marked on the inside (circled). PS01 Make sure the rear left overrider is place on the Screw the overrider to the bumper with a PS01 left side.
  • Page 10 Stage 093: Attaching the Rear Bumper PS01 Take the rear right overrider (93-C) marked with Screw the overrider to the bumper with a PS01 “R R”. Push it into the rear bumper. screw. Push the rear bumper into the body assembly. AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 11 Stage 093: Attaching the Rear Bumper PS20 PS20 Screw the rear bumper to the body with 2x PS20 screws. S T A G E C O M P L E T E AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 12 Stage 094: Attaching the Front Bumper In this stage you will attach the front number plate and bumper. If you are using the non-LED number plates, you will need the parts from stage 100. S T A G E 0 9 4 P A R T S L I S T Name Name 94-A Front bumper...
  • Page 13 Stage 094: Attaching the Front Bumper Building the Front Bumper Push the front right overrider into the front Take the front right overrider (94-C). It has “F R” bumper (94-A). Make sure you are placing it on marked on the inside (circled). the correct side.
  • Page 14 Stage 094: Attaching the Front Bumper PS05 Fitting the Non-LED Front Number Plate Screw the front number plate to the front Take the front number plate (100-E) and push it bumper with a PS05 screw. into the front bumper. If you are using the LED number plates, go to step 11 on page 16.
  • Page 15 Stage 094: Attaching the Front Bumper Push the front bumper into the main body. PS20 PS20 Screw the front bumper to the body with 2x PS20 screws. You can now continue to stage 095. AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 16 Stage 094: Attaching the Front Bumper Fitting the LED Front Number Plate Align the screen with the front number plate Take the front number plate screen (94-G) and frame front (94-E) as shown. peel the protective film from it. Place the screen into the frame, then align the Fit the back in place.
  • Page 17 Stage 094: Attaching the Front Bumper PS06 Turn the number plate over and check the screen Secure the front and back together using is centred (dashed line). Carefully adjust the 2x PS06 screws. position by sliding the screen if needed. PS01 Push the screen ribbon cable through the Screw the front number plate to the front...
  • Page 18 Stage 094: Attaching the Front Bumper Take the circuit board (94-F) and unlock the socket by sliding the black section out as shown. Plug the ribbon cable into the circuit board. Lock the socket by pushing the black section back in. AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 19 Stage 094: Attaching the Front Bumper Place the circuit board onto the front bumper. PS01 PS01 Screw the circuit board to the front bumper with Fold the ribbon cable and tuck it into the front 2x PS01 screws. bumper. AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 20 Stage 094: Attaching the Front Bumper Push the front bumper into the main body (stage 93). PS20 PS20 Screw the front bumper to the body with 2x PS20 screws. AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 21 Stage 094: Attaching the Front Bumper S T A G E C O M P L E T E AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 22 Stage 095: Building the Right Headlight and Minigun In this stage you’ll build the right headlight and the M134 minigun S T A G E 0 9 5 P A R T S L I S T Name Name 95-A Headlight housing (R) 95-H M134 barrel clamp 95-B Headlight reflector 95-I M134 muzzles...
  • Page 23 Stage 095: Building the Right Headlight and Minigun Press the headlight glass (95-C) into the reflector Push the reflector into the headlight housing (95-B). There is a small tab which goes into a (95-A). small recess (arrow). PS21 Screw the parts together with a PS21 screw. Press the headlight cover (95-D) into the headlight housing.
  • Page 24 Stage 095: Building the Right Headlight and Minigun Gently push the headlight LED (95-L) into the Push the barrel cluster (95-J) onto the barrel headlight housing. clamp (95-H). There is a recess on the barrel clamp so it only fits in one way. PS21 Push the muzzles (95-I) into the barrel cluster.
  • Page 25 Stage 095: Building the Right Headlight and Minigun Take one of the light rods (95-K) and push it into Take another light rod and press it into another a barrel. barrel. You may find it easier to push the light rods in by pressing down on the table as shown.
  • Page 26 Stage 095: Building the Right Headlight and Minigun DS41 Screw the bezel to the main body with a DS41 Push the foglight lens (95-F) into the foglight screw. Be very careful your screwdriver doesn’t mount (95-G). slip and scratch the paintwork! Push the foglight into the main body.
  • Page 27 Stage 095: Building the Right Headlight and Minigun S T A G E C O M P L E T E AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 28 Stage 096: Installing the Right Headlight and Minigun Mechanism In this stage you’ll build and install the mechanism that operates the right headlight and minigun. S T A G E 0 9 6 P A R T S L I S T Name Name 96-A Mechanism part 1...
  • Page 29 Stage 096: Installing the Right Headlight and Minigun Mechanism Assembling the Headlight Minigun Mechanism Press the other clamp into the mechanism part 1 Press one of the clamps (96-H) into the (96-A). mechanism part 2 (96-B). PS05 Push mechanism part 1 into mechanism part 3 Screw the parts together with a PS05 screw.
  • Page 30 Stage 096: Installing the Right Headlight and Minigun Mechanism Place the minigun stopper (96-D) into the rail on The minigun stopper will align with the clamp part 1 in the orientation shown. when pushed back along the rail. PS05 Hold the minigun stopper in place and turn Screw the parts together with 2x PS05 screws.
  • Page 31 Stage 096: Installing the Right Headlight and Minigun Mechanism PS05 Push the headlight stopper (96-F) onto the right Screw the parts together with a PS05 screw. headlight housing (stage 095). Place the long spring (96-K) onto the shaft (96-I). Push the shaft into the minigun stopper bracket. AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 32 Stage 096: Installing the Right Headlight and Minigun Mechanism DS02 Push the other end of the shaft into the recess. Screw the shaft to part 1 using a DS02 screw. Push the right headlight housing onto part 1, The assembly should now look like this. fitting the headlight stopper between the rails as shown by the blue arrow.
  • Page 33 Stage 096: Installing the Right Headlight and Minigun Mechanism DS02 Take mechanism part 2 (from step 1) and place it Screw the parts together with 2x DS02 screws. over the two screw holes. PS17 Screw the headlight stopper with a PS17 screw. Place the short spring (96-J) onto the headlight Don’t overtighten as the part should be able to shaft.
  • Page 34 Stage 096: Installing the Right Headlight and Minigun Mechanism DS03 Push the cap (96-G) over the end of the shaft. Screw the cap to the shaft with a DS03 screw. Push the headlight until it clicks into the clamp Push the motor (96-L) into the minigun stopper. (circled) and holds in place.
  • Page 35 Stage 096: Installing the Right Headlight and Minigun Mechanism Press the motor firmly in place, taking care not to Push the minigun assembly (stage 095) onto the damage the wires. pin of the motor. Push the muzzle flash LED (96-M) into the Make sure the bulb is pressed firmly in place.
  • Page 36 Stage 096: Installing the Right Headlight and Minigun Mechanism Attaching the Mechanism Push the mechanism onto the main body. DS02 DS02 Screw the mechanism to the first screw post Screw the mechanism to the second screw post with a DS02 screw. with a DS02 screw.
  • Page 37 Stage 096: Installing the Right Headlight and Minigun Mechanism DS28 Screw mechanism part 3 (96-C) to the main body To return the headlight, push the minigun back with 2x DS28 screws. inside until it clicks. Push down on the headlight to release it from The headlight will pop back up into place.
  • Page 38 Stage 096: Installing the Right Headlight and Minigun Mechanism S T A G E C O M P L E T E AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 39 Stage 097: Building the Left Headlight and Minigun In this stage you’ll build the left headlight and the M134 minigun S T A G E 0 9 7 P A R T S L I S T Name Name 97-A Headlight housing (L) 97-H M134 barrel clamp 97-B Headlight reflector 97-I M134 muzzles...
  • Page 40 Stage 097: Building the Left Headlight and Minigun Press the headlight glass (97-C) into the reflector Push the reflector into the left headlight housing (97-B). There is a small tab which goes into a (97-A). small recess (arrow). PS21 Screw the parts together with a PS21 screw. Press the headlight cover (97-D) into the headlight housing.
  • Page 41 Stage 097: Building the Left Headlight and Minigun Push the headlight LED (97-L) into the headlight Push the barrel cluster (97-J) onto the barrel housing. clamp (97-H). There is a recess on the barrel clamp so it only fits in one way. PS21 Push the muzzles (97-I) into the barrel cluster.
  • Page 42 Stage 097: Building the Left Headlight and Minigun Take one of the light rods (97-K) and push it into Take another light rod and press it into another a barrel. barrel. You may find it easier to push the light rods in by pressing down on the table as shown.
  • Page 43 Stage 097: Building the Left Headlight and Minigun Push the foglight into the main body. Place the headlight bezel onto the main body. DS41 Screw the bezel to the main body with a DS41 screw. AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 44 Stage 097: Building the Left Headlight and Minigun S T A G E C O M P L E T E AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 45 Stage 098: Installing the Left Headlight and Minigun Mechanism In this stage you’ll build and install the mechanism that operates the left headlight and minigun. S T A G E 0 9 8 P A R T S L I S T Name Name 98-A Mechanism part 1...
  • Page 46 Stage 098: Installing the Left Headlight and Minigun Mechanism Assembling the Headlight Minigun Mechanism Press the other clamp into the mechanism part 1 Press one of the clamps (98-H) into the (98-A). mechanism part 2 (98-B). PS05 Push mechanism part 1 into mechanism part 3 Screw the parts together with a PS05 screw.
  • Page 47 Stage 098: Installing the Left Headlight and Minigun Mechanism Place the minigun stopper (98-D) into the rail on The minigun stopper will align with the clamp part 1 in the orientation shown. when in place PS05 Hold the minigun stopper in place and turn Screw the parts together with 2x PS05 screws.
  • Page 48 Stage 098: Installing the Left Headlight and Minigun Mechanism PS05 Push the headlight stopper (98-F) onto the left Screw the parts together with a PS05 screw. headlight housing (stage 097). Place the long spring (98-K) onto the shaft (98-I). Push the shaft into the minigun stopper bracket. AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 49 Stage 098: Installing the Left Headlight and Minigun Mechanism DS02 Push the other end of the shaft into the recess Push the left headlight housing onto part 1, and screw it in using a DS02 screw. fitting the headlight stopper between the rails as shown by the blue arrow.
  • Page 50 Stage 098: Installing the Left Headlight and Minigun Mechanism Place the short spring (98-J) onto the headlight Push the cap (98-G) over the end of the shaft. shaft. DS03 Screw the cap to the shaft with a DS03 screw. Push the headlight until it clicks into the clamp (circled) and holds in place.
  • Page 51 Stage 098: Installing the Left Headlight and Minigun Mechanism Push the motor (98-L) into the minigun stopper. Push the minigun assembly (stage 097) onto the pin of the motor. Push the muzzle flash LED (98-M) firmly into the minigun stopper. AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 52 Stage 098: Installing the Left Headlight and Minigun Mechanism Attaching the Mechanism Push the mechanism onto the main body. DS02 DS02 DS28 Screw the mechanism to the posts with 2x DS02 Screw mechanism part 3 (98-C) to the main body screws.
  • Page 53 Stage 098: Installing the Left Headlight and Minigun Mechanism S T A G E C O M P L E T E AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 54 Stage 099: Building the Remote Control In this stage you’ll build the remote control which operates the electric functions. You’ll also attach the bonnet struts to your model. S T A G E 0 9 9 P A R T S L I S T Name 99-A Bonnet strut x2 99-B Remote control battery cover...
  • Page 55 Stage 099: Building the Remote Control Push the remote control front (99-E) onto the Plug the remote control body (99-C) into the buttons (99-D). circuit board (99-F). PS32 PS32 PS32 Push the circuit board into the buttons. Screw the circuit board to the remote control front with 3x PS32 screws.
  • Page 56 Stage 099: Building the Remote Control PS32 PS32 PS32 PS32 Place the remote control front onto the body. Screw the remote control front to the body with Make sure the wire does not get trapped (circled). 4x PS32 screws. LR44 x3 Insert 3x LR44 batteries into the remote control Align one of the bonnet struts (99-A) with the then fit the battery cover (99-B).
  • Page 57 Stage 099: Building the Remote Control DS29 DS29 Screw the bonnet strut to the main body with a Screw the second bonnet strut to the main body DS29 screw. with a DS29 screw in the same way. S T A G E C O M P L E T E AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 58 Stage 100: Attaching the Chassis and Body In the final stage you’ll attach the chassis to the body and finish adding the last details to your model. You’ll also have options to install slim-line tyre slashers and apply scratched paintwork to your model. S T A G E 1 0 0 P A R T S L I S T Name 100-A Roof panel...
  • Page 59 Stage 100: Attaching the Chassis and Body Place the main body (stage 099) upside down on your work surface. Align the bonnet (stage 001) with the main body. Check that the hinge joints (circled) are pointing upwards, then push them into place. PS05 PS05 To secure the bonnet, start by screwing a PS05...
  • Page 60 Stage 100: Attaching the Chassis and Body Bend the wires at the front over the wheel Bend the wires at the rear over the body. arches. Note: If you did not attach the side mirrors in Pack 9, attach them now. Take the chassis assembly (stage 068).
  • Page 61 Stage 100: Attaching the Chassis and Body Carefully lower the front of the chassis into the main body. Note: You may prefer to test the electrics now (page 61) before pressing the chassis into place (steps 8 and 9). Note the screw hole (circled) at the rear of the While applying pressure, lower the rear end of chassis.
  • Page 62 Stage 100: Attaching the Chassis and Body Number Location Function Front Left Headlight Front Right Headlight Front Left Minigun motor Front Right Minigun motor Front Left Minigun light Front Right Minigun light Front Right LED front plate Rear Left LED rear plate Rear Left Brake light Rear Right...
  • Page 63 Stage 100: Attaching the Chassis and Body Press the “B” button on the remote control (stage Press the “A” button. The headlights and 099). The rear brake lights will light up. Press the dashboard lights will turn on. Press the button button again to turn them off.
  • Page 64 Stage 100: Attaching the Chassis and Body After you have tested the electrics, switch the Tuck the cables at the rear of the model into the power off. gaps between the body and the chassis. PS05 Screwing the Chassis to the Body Tuck the cables at the front of the model into the wheel arches.
  • Page 65 Stage 100: Attaching the Chassis and Body PS05 PS05 Screw a PS05 screw into the rear left corner. Screw a PS05 screw into the hole behind the rear right wheel. PS05 PS05 Screw a PS05 screw into the hole behind the rear Screw a PS05 screw into the back of the chassis.
  • Page 66 Stage 100: Attaching the Chassis and Body DS02 DS02 Screw 2x DS02 screws into the two holes on the right side of the chassis. DS02 DS02 Screw 2x DS02 screws into the two holes on the left side of the chassis. AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 67 Stage 100: Attaching the Chassis and Body DS02 DS02 Screw 2x DS02 screws into the two holes in the front wheel arches. DS12 Finishing the Model Screw a DS12 screw into the hub. You may want Push the wheel (stage 004) onto the front right to add some oil to the screw.
  • Page 68 Stage 100: Attaching the Chassis and Body DS12 Place the hub cap (stage 004) onto the wheel. Push the other wheel (stage 029) onto the front The magnet will hold it in place. left hub and screw in a DS12 screw. Place the hub cap (stage 029) onto the wheel.
  • Page 69 Stage 100: Attaching the Chassis and Body You will need to remove the roof panel before If you placed the washer bottle in a safe place in using the ejector seat! stage 062, insert it back into the holder. Open the boot and remove the mine To release the minimines, pull open the mine compartment cover.
  • Page 70 Stage 100: Attaching the Chassis and Body Optional Steps Your No Time To Die Aston Martin DB5 is complete, but there are some optional changes you can make in the steps on the following pages. To change the rear tyre slashers to the slim-line version follow the steps on page 71. To apply the scratched paintwork decals follow the steps on page 73.
  • Page 71 Stage 100: Attaching the Chassis and Body Installing the Slim-line Tyre Slashers Keep the tyre slasher (circled). Pull the tyre slasher and hub cap out from the rear wheel. Push one of the slim-line rear hub caps (100-B) Push the tyre slasher (from step 2) onto the pin. over the pin in the centre of the wheel.
  • Page 72 Stage 100: Attaching the Chassis and Body The slim-line tyre slasher has been installed. Repeat steps 1–4 to install the tyre slasher on the other rear wheel. AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 73 Stage 100: Attaching the Chassis and Body Applying the Scratched Paintwork Decals Take one of the scratched paintwork decal sheets and carefully cut it into three sections. Align the sections with the corresponding panels on the car. AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 74 Stage 100: Attaching the Chassis and Body Place the rear decal into water for 30 seconds. Use a brush to wet the area on the rear panel. Hold it flat to stop it from curling up. Slide the decal off the paper and onto the rear Adjust the decal around the rear wheel arch.
  • Page 75 Stage 100: Attaching the Chassis and Body Apply the middle decal in the same way, making Apply the front decal in the same way, making sure to line up the scratches as shown by the sure to line up the scratches as shown by the arrows.
  • Page 76 Stage 100: Attaching the Chassis and Body After 12 hours, peel away the pink protective film. Use a wet brush to smooth down any overlapping edges. Insert the side strakes back into place. AGORAMODELS NO TIME TO DIE ASTON MARTIN DB5...
  • Page 77 Stage 100: Attaching the Chassis and Body S T A G E C O M P L E T E Your model is now complete! Don’t forget, as an Agora Advantage Club member you will have Reward points to redeem. You may now have enough points to enjoy a free pack 1 for your next model.