ST X-STM32MP-RBT01 Getting Started page 7

6 STSPIN948 slew rate
SW1 and SW2 are used to select the Slew Rate of both STSPIN948 U2 and U3 respectively. Slew Rate depends
on the resistance value connected on the SR pin STSPIN948. Refer below table for different Slew Rate settings:
UM3482 - Rev 1
Table 3.
R (± 5%)
SR
1 kΩ
2.2 kΩ
5.6 kΩ
10 kΩ
Slew rate selection
Output slew rate (typ.) (V/ns)
1.2
0.6
0.3
UM3482
STSPIN948 slew rate
2
page 7/36