Subscribe to Our Youtube Channel
Related Manuals for PureLink UHDS-41R
Summary of Contents for PureLink UHDS-41R
- Page 1 UHDS-41R Owner’s Manual 4 x 1 HDMI 2.0 Ultra HD/4K HDR Switch PureLink™ www.purelinkav.com 22-10 State Route 208 Fair Lawn, NJ 07410 For technical support, contact: Main (201) 488-3232 support@purelinkav.com E MAIL : sales@purelinkav.com...
-
Page 2: Package Contents
Release date 12/19/2024 General Specification PureLink’s UHDS-41R HDMI switch allows up to four (4) HDMI 2.0 digital video sources (with audio) to share one video display (with audio). Our unique switch allows easy switching between different digital video sources (with audio) with auto switching by input signal detection, remote control unit, with a manual toggle button in front and/or via RS232 port. -
Page 3: Operation And Reliability Specification
Connector Type 4 x HDMI inputs 1 x HDMI output 1 x IR 1 x RS232 1 x Analog audio out 1 x DC power jack HDCP Support HDCP 2.2 ESD Protection ± 8kV (air-gap discharge) Human Body Model ± 4kV (contact discharge) Conformations HDMI version 2.0 DVI version 1.0... -
Page 4: Main Features
4. Reliability MTBF: 90% at over 50,000 hours aging test ∙ In compliance with LCD Monitor reliability test standards Main Features 1. Ultra HD/4K resolution supports up to 4K60Hz (4:4:4 pixel format) 2. HDMI 2.0 & HDCP v2.2 support 3. High Dynamic Range (HDR) 10 bits support 4. -
Page 5: Installation And Connection Instructions
6. Turn on your video sources. 7. Use your remote control unit to switch channels. Or use the select button on the front panel of the switch to change channels. UHDS-41R Specification Front Panel ① Input switching status LED indicator ②... - Page 6 CH : Video EDID from the display connected the output + 2 Ch audio 5.1 CH: Video EDID from the display connected the output + 5.1 Ch audio 7.1 CH: Video EDID from the display connected the output + 7.1 Ch audio ④ EDID select button - Press to select between EDID mode ⑤...
- Page 7 IR Remote Auto/2.1ch/5.1ch/7.1ch: Press these buttons to select EDID mode Auto Source: Press to select between auto switching mode and manual switching mode In1/In2/In3/In4: Press to select input RS232 Communication Setting Baud rate: 19200 Data bits: 8 Parity : None Stop bits : 1 Flow control : None ARC: Press to enable/disable ARC function...
- Page 8 Command protocols Command Protocols Command Feedback Input switching command Input 1 IN1! Input 2 IN2! Input 3 IN3! Input 4 IN4! Input Auto switching ONAUTO!
- Page 9 OFFAUTO! Audio EDID switch Audio auto Stereo Audio 2.0 Dolby/DTS 5.1 HD Audio 7.1 ONARC! OFFARC! HDMI Connector Pin Assignments HDMI port Pin No. Description Remarks HDMI 19pin TMDS DATA 2P TMDS DATA 2 Shield TMDS DATA 2M TMDS DATA 1P TMDS DATA 1 Shield TMDS DATA 1M TMDS DATA 0P...
- Page 10 TMDS DATA 0 Shield TMDS DATA 0M TMDS Clock P TMDS Clock Shield TMDS Clock M RESERVED DDC Clock DDC DATA Hot Plug Detect...
-
Page 11: Terms And Conditions
Product or the failure of Product to perform, including incidental or consequential damages. PureLink shall not be liable for any claim made by a third party or made by the purchaser for a third party. Except as expressly set forth in this warranty, PureLink makes no other warranties, expressed or implied, including any implied warranties of merchantability and fitness for a particular purpose. -
Page 12: Customer Service
Customer and a PureLink technician. To better enable PureLink to address a warranty claim, please have the Product’s serial and model numbers. If PureLink, in its sole discretion, determines that an on-site visit or other remedial action is necessary, PureLink may send a representative to Customer’s site.
Need help?
Do you have a question about the UHDS-41R and is the answer not in the manual?
Questions and answers