Wireless Link; Setup Mode - Power Probe PPEVTEST User Manual

PPEVTEST

Wireless Link

Please confirm if the connection function is enabled. If enabled, will twinkle the BLE
symbol, if links to the APP will stop twinkling.
The meter uses Bluetooth low energy (BLE) V5.0 wireless technology to download the
stored data. The open-air communication range is up to 6m. Download the "PowerProbe
Link" App via the following QR Code. Turn on the LINK function of the meter and open
the "PowerProbe Link" to connect the DMM. The LINK icon of the meter will freeze on
the LCD after the connection is established successfully.
PowerProbe Link

Setup Mode

Item
APO (Auto Power Off)
Brightness
Basic BLE
Data Record
Temp
Compare
R
2W
Diode
Unit
R
4W
Compare
Timer
R DAR MODE
INS
Compare
Factory Reset
Version-AD
Info Version-UI
Check Fuse
on App Store
Press the "OK" Button to Enter the Data Record.
0.5, 1, 2, 3, 4, 5, 10, 20, 30, 40, 50Ω
Ω/m, Ω/ft, only for length measuring.
0.5m, 1m, 2m, 3m, 4m, 5m, 10m, 20m, 30m, 40m, 50mΩ
0.5M, 10M, 20M, 50M, 100M, 200M, 500M, 1000MΩ
Reset the device to factory settings
Check fuse is good. Press the "OK" Button after
15
PowerProbe Link
on Google Play
Directions
1, 2, 5, 10, 20 minute, OFF
1~5
ON/OFF Wireless transmission
˚C, ˚F
Classic, Smart
1~60 min
15 sec, 30 sec
A version of the measuring chip
A version of the main chip
open-circuit from Ohm to COM.
EN