Power Probe PPEVTEST User Manual page 15

PPEVTEST
Using the STORE function
1. Press the "STORE" button to store the test result. The screen will show the MEM
symbol when the "STORE" button is pressed.
2. In the PI / DAR /Timer mode of RINS, the "STORE" button is only available when the
individual test is completed.
3. In the R / R / R
INS 2W
in Lock Mode and continuous output or the test is completed.
4. Up to 400 recordings/recording sets of each function.
Function / Mode
Voltage
R
2W
Diode
R
4W
Length
Capacitance
Temperature
R
INS
PI
DAR
Timer
Using the AUTO SAVING function
1. Press the "STORE" button >2sec to enable the "AUTO SAVING ". The screen will
twinkle the symbol when the autosaving function is enabled.
2. The reading will be automatically saved when it meets the storage conditions.
3. The autosaving function will be action at R
and continuous output.
4. The storage and restart conditions for each mode are as follows:
Function / Mode
ACV
DCV
LPF
Diode
R
2W
Length
R
4W
Capacitance
Temperature
R
INS
PI
DAR
Timer
mode, the "STORE" button is only available when the testing is
4W
Recording1
Voltage
Resistance
Voltage
Resistance
Length
Capacitance
Temperature
Insulation
Resistance
PI Value
DAR Value
Insulation
Resistance
Active
Stable>3sec
Stable>3sec
Stable>3sec
Stable>3sec
Stable>3sec
Disable
Stable>3sec
Stable>3sec
Disable
Stable>3sec
Disable
Disable
Disable
13
Recording2
Frequency
Output Voltage
Output Voltage
R1min Value
R15sec/ R30sec
Value
Output Voltage
, R , Diode, and R
2W 4W INS
Restart
Reading<100D in the lowest range
Reading<100D in the lowest range
Reading<100D in the lowest range
Reading displays Overload
Reading displays Overload
Disable
Reading displays Overload
Reading<100D in the lowest range
Disable
Reading displays Overload
Disable
Disable
Disable
EN
Recording3
Output Current
Leakage Current
R10min Value
R1min Value
Leakage Current
, only set in lock