Dell POWEREDGE 1900 Hardware Owner's Manual page 90

Figure 3-24. Installing and Removing a Processor
1
1 socket key (2)
4 socket-release lever
13 Lift the processor out of the socket and leave the release lever up so that the socket is ready for the
new processor.
NOTICE:
Be careful not to bend any of the pins on the ZIF socket when removing the processor. Bending the pins
can permanently damage the system board.
14 Unpack the new processor.
15 Align the processor with the socket keys on the ZIF socket. See Figure 3-24.
16 Install the processor in the socket.
NOTICE:
Positioning the processor incorrectly can permanently damage the system board or the processor when
you turn it on. When placing the processor in the socket, be careful not to bend the pins in the socket.
If the release lever on the processor socket is not positioned all the way up, move it to that
a
position.
With the processor and the socket keys aligned, set the processor lightly in the socket, making
b
sure all pins are matched with the correct holes in the socket.
90
Installing System Components
3
2
2 ZIF socket
5 processor shield
4
3 processor
5