Dell POWEREDGE 1900 Hardware Owner's Manual page 55

3 Remove the fan from the bracket by squeezing the release handles on top of the fan and pulling the
fan out of the bracket. See Figure 3-7.
NOTICE:
Do not remove more than one fan from the system at a time and do not operate the system with any fan
removed for an extended period of time. Overheating can occur resulting in a system shutdown and loss of data.
4 Replace the fan.
5 Rotate the fan bracket toward the shroud and slightly squeeze the side tabs so that the tabs enter the
latch slots.
6 Close the system. See "Closing the System" on page 48.
Figure 3-7. Removing and Replacing the Cooling Shroud Fan
1
5
1 fan
4 fan bracket latch (2)
2
4
2 fan release latches (2)
5 fan bracket
3
3 cooling shroud
Installing System Components
55