Dell POWER EDGE 2900 Hardware Owner's Manual page 88

Figure 3-23. Installing a RAC Card
8
7
6
1 notch in card edge
4 RAC card
7 expansion-bay bracket
5 Angle the RAC card so that its NIC connector inserts through the back-panel RAC card opening.
See Figure 3-23.
6 Attach the card to the expansion-bay bracket:
Position the RAC card on the expansion-bay bracket so that the plastic standoff at the back of the
a
bracket inserts into the notch on the edge of the RAC card.
Carefully press the back end of the card onto the two plastic standoffs until the clips on the
b
standoffs snap over the card edges. See Figure 3-23.
88
Installing System Components
1
2 back standoff
5 RAC connector 2
8 standoffs with card-edge clips
(2)
2
3
4
5
3 NIC connector cutout
6 RAC connector 1