Dell POWER EDGE 2900 Hardware Owner's Manual page 21

Table 1-6. LCD Status Messages (continued)
Code Text
E1422 CPU Machine Chk
E1610 PS # Missing
E1614 PS # Status
E1618 PS # Predictive
E161C PS # Input Lost
PS # Input Range Power source for specified power
E1620
E1624 PS Redundancy
E1710 I/O Channel Chk
E1711 PCI PERR B## D##
F##
PCI PERR Slot #
Causes
The system BIOS has reported a
machine check error.
No power is available from the
specified power supply; specified
power supply is improperly
installed or faulty.
No power is available from the
specified power supply; specified
power supply is improperly
installed or faulty.
Power supply voltage is out of
acceptable range; specified power
supply is improperly installed or
faulty.
Power source for specified power
supply is unavailable, or out of
acceptable range
supply is unavailable, or out of
acceptable range
The power supply subsystem is no
longer redundant. If the last
supply fails, the system will go
down.
The system BIOS has reported an
I/O channel check error.
The system BIOS has reported a
PCI parity error on a component
that resides in PCI configuration
space at bus ##, device ##,
function ##.
The system BIOS has reported a
PCI parity error on a component
that resides in PCI slot #.
Corrective Actions
See "Getting Help" on page 147.
See "Troubleshooting Power
Supplies" on page 122.
See "Troubleshooting Power
Supplies" on page 122.
See "Troubleshooting Power
Supplies" on page 122.
Check the AC power source for
the specified power supply. If
problem persists, see
"Troubleshooting Power Supplies"
on page 122.
Check the AC power source for
the specified power supply. If
problem persists, see
"Troubleshooting Power Supplies"
on page 122.
See "Troubleshooting Power
Supplies" on page 122.
See "Getting Help" on page 147.
Remove and reseat the PCI
expansion cards. If the problem
persists, see "Troubleshooting
Expansion Cards" on page 131.
If the problem persists, the
system board is faulty. See
"Getting Help" on page 147.
About Your System
21