4 Attach the interposer card to the rear of the SATA hard drive:
Angle the top of the interposer card into the inside top carrier rail so that the tabs on the
a
interposer card bracket attach to the slots on the inside of the carrier rail. See Figure 3-9.
Rotate the bottom end of the card toward the hard drive to seat the connector. See Figure 3-9.
b
Push the bottom end of the card to the hard drive until the latch on the card bracket clicks into
c
place.
Figure 3-9. Installing a SATA Hard Drive and Interposer Card Into a SATAu Drive Carrier
1
1
screws (4)
4
SATA hard-drive
2
5
2
SATAu drive carrier
5
hole labels
3
4
3
interposer card (SATA only)
Installing System Components
61