Tektronix SignalScout RFM151 Instruction Manual page 99

Measurement Reference
delete. The highlight box moves as you rotate the knob to
indicate which limit is selected.
(DEL). You will be prompted to ensure that you want to
m@ To delete all of the limits in the menu, press F5 (DEL ALL).
Again, you will be prompted to ensure you want to delete all
® To clone limits (copy limits to another instrument), press F3
(CLONE LIMIT). See Appendix B:Remote Communications
To edit or create a new ingress limit, continue with the procedure.
editing a limit. The rest of this procedure describes how to edit an
existing limit, however, it also applies to creating a new limit.
4. Press F2 (EDIT LIMIT). The menu depicted in Figure 3-23 will
Type:
> Start Frequency:
29.00 MHz
SET
AMP TYPE
ACCEPT
3-51