Tektronix SignalScout RFM151 Instruction Manual page 171

a Torx® screwdriver: #10 and #15 tips (#15 unless noted)
9/16 in torque wrench for the RF input connector
= 7/16 in torque wrench for the encoder switch and RF input
adapter
assembly, speaker, encoder. or fuse
WARNING. Opening the SignalScout RF analyzer case while an RF
signal is applied can expose the operator to hazardous voltages.
Always disconnect the RF INPUT connector from the SignalScout RF
>
CAUTION. The only service that you should perform during the
during the warranty period, return the instrument to a Tektronix
When installing new circuit boards, or returning boards to Tektronix
for exchange, be sure to use a clean, static-free work area, and
follow anti-static handling methods. Be sure to place the exchange
NOTE. Work in a clean, static-free area and use proper anti-static
procedures.
SignalScout RFM151 RF Analyzer Instruction Manual 6-1