Introduction; Scope Of This Manual; References; Trademark Acknowledgments - Anritsu Spectrum Master MS2721A Programming Manual

1 Introduction

Scope of this Manual

This manual contains descriptions of the remote commands available for Anritsu's line of
Master™ products.
While it does reference the equivalent front-panel interface for each command, it does not
provide a complete front panel reference. Please see the appropriate product's User's
Guide for that information.

References

IEEE Standard 488.2-1992, IEEE Standard Codes, Formats, Protocols and Common
Commands for Use with ANSI/IEEE Std 488.1-1987. IEEE, New York, NY, 1992.
SCPI Standard-1999, Standard Commands for Programmable Instruments Volume 1:
Syntax and Style. SCPI Consortium, San Diego, CA, 1999.
MS2721A Spectrum Analyzer User's Guide (document #10580-00103). Anritsu
Company, Morgan Hill, CA, 2004.
NI-VISA User Manual (document #370423A-01). National Instruments Corporation,
Austin, TX, 2001.

Trademark Acknowledgments

NI-VISA and LabVIEW are trademarks of National Instruments Corporation.
Spectrum Master is a trademark of Anritsu Company.

Firmware Revisions

To check your current firmware revision, press Shift-8 (System), Status.
Remote commands are available beginning with Base Version 1.13. They are available
in the applications beginning with the following firmware revisions:
Application
Spectrum Analyzer
www.valuetronics.com
Firmware Revision
1.12
5