Identifiers
The following identifiers have been used throughout the remote command definitions.
Descriptions are provided here. In most cases, units will be specified with the individual
command.
Identifier
<amplitude>
<freq>
<integer>
<number>
<percentage>
<rel ampl>
<x-parameter>
<string>
<file name>
www.valuetronics.com
Description
Amplitude value. Units specified with the command.
Frequency. Units specified with the command.
Integer value, no units. Range specified with the
command.
Numeric value, integer or real.
Percentage value from 0-100. Units are always "%".
Relative amplitude. Units are always dB.
Parameter value in the units of the x-axis. Units are
specified with the command.
The string should be enclosed in either single quotes (' ')
or double quotes (" ").
The name should be enclosed in either single quotes (' ')
or double quotes (" "). The need for an extension will be
documented with applicable commands.
10
Need help?
Do you have a question about the Spectrum Master MS2721A and is the answer not in the manual?