Table of Contents
Advertisement
3
Touch [Select Position].
NOTE
The stapling position cannot be specified if
Corner Staple is selected. It can, however, be
specified if Corner Staple is combined with Hole
Punch.
4
Touch the desired stapling position on the
Touch Panel.
5
Touch [Enter].
NOTES
• Stapling is not possible in the Interrupt mode.
• Note the correct direction of the originals when
making copies in the Sort Staple mode.
p.3-32
• Note the position at which the copy set or stack
is stapled together in the Staple mode.
p. 4-22
• If an original is placed directly on the Original
Glass in a Staple mode, Separate Scan is
automatically set.
p.3-67
<Only when the Finisher FN-106/Mailbin Finisher
is mounted>
1
Touch the desired finishing function key.
4003P335EA
2
Touch [Corner Staple].
NOTES
• When [Corner Staple] is touched with Non-Sort
selected, the Finisher is automatically set into
the Sort mode.
• Stapling is not possible in the Interrupt mode.
• Stapling position cannot be specified if the
4003P036CA
machine is equipped with a Finisher FN-106 or
Mailbin Finisher. When the Mailbin Finisher is
mounted, however, you can select the stapling
position only if Hole Punch is combined with
Staple.
• Note the correct direction of the originals when
making copies in the Sort Staple mode.
p.3-32
• If an original is placed directly on the Original
Glass in a Staple mode, Separate Scan is
automatically set.
Useful Tip
Paper size : 11 17L to Letter
Number of sheets to be stapled :
3-25
5. Selecting the Finishing
4003P037CA
4003P038CA
p.3-67
Mailbin Finisher: 2 to 50
Finisher FN-106: 2 to 30
Advertisement
Table of Contents
