Table of Contents
Advertisement
Using a Particular Edge/Frame Erase
Function
1
Touch [Erase/Frame Erase].
2
Load the originals.
3
Select the desired erase function
("Position").
Useful Tip
If you want to place the original in a direction
other than the standard, see "[Original
Direction] key."
p.3-38
4
Hold down [ ] or [ ] until the desired erase
width is reached.
Useful Tip
You can change the erase width in 1/16
increments within the range 1/4 to 3/4.
5
Touch [Enter].
NOTE
The erase width represents that on the original,
not on the copy. So, use care when making a
reduction or enlargement copy.
4003P092CA
Example: Erasing the margin of a 11 17 size
Original (11 17 L)
1/2
If you want to erase the 1/2-wide margin on the
original, select 1/2 for the erase width.
4003P393EA
4003P394EA
8. Auxiliary Functions
original on a copy reduced by 0.5:
0.5 Copy (5-1/2 8-1/2 L)
1/4
3-57
1166O255AA
Advertisement
Table of Contents
