Using Basic Copying Functions; Basic Copying Procedures - Minolta DI450 Operator's Manual

3-2

1. Using Basic Copying Functions

Basic Copying Procedures

One of the most basic copying jobs is to make full-size ( 1.000) copies of the original.
Place the original in position (step 2), set the number of copies to be made (step 9), and press the start key
(step 10). This will allow you to make full-size copies on paper of the same size as the original.
[*In the initial mode, Auto Paper, Full Size, and Auto Exposure are automatically selected.]
The selections you make on the Touch Panel will change the exposure level, zoom ratio, the type
of copy and so on.
1. Press the copy key.
2. Placing the Original
Load the originals face up in the
Electronic Document Handler.
p.3-4
• Changing the paper size
• Changing the zoom ratio
• Sorting copies
• Stapling copies
• Punching holes in copies
• Making copies from a book
• Saving paper to make copies
Raise the Original Cover and place the original
face down on the Original Glass.
4002O122AC
Selecting the basic functions
3. Touch [Paper].
p.3-9
4. Touch [Zoom].
p.3-14
5. Touch [Finishing].
p.3-20
Selecting the Original
6. Touch [Orig. Copy].
p.3-36
4002O281CA
p.3-6
4002O123AC
Copy Type
4003P001CA
4003P002CA