Minolta DI450 Operator's Manual page 67

3-24
5. Selecting the Finishing
[Select Position] key:
Use this key when you want to place your original
in a direction other than the standard or make
punch holes in positions other than those made
automatically.
1
Touch [Select Position].
2
Touch the desired hole-punching position.
3
Touch [Enter].
Staple
<Only when the Finisher FN-5/Finisher FN-105 is
mounted>
1
Touch the desired finishing function key.
2
Touch the stapling key of your choice.
4003P332EA
You have a choice of the following two stapling
types.
4003P333EA
• Corner Staple
A
4002O067AA
• 2-Point Staple
<Side Staple>
A
4002O068AA
<Center Staple>
(Only when the Finisher FN-5 is mounted)
A B
4002O069AA
* When you touch a stapling key in the Non-
Sort mode, the finisher is automatically set
into the Sort mode.
4003P330EA
4003P334EA
Paper size : 11 17L to Letter
Number of sheets : 2 to 50
Paper size : 11 17L to Letter
Number of sheets : 2 to 50
Paper size : 11 17L, LetterL (For United
States and Canada Users)
: 11 17L to LetterL (Except
United States and Canada Users)
Number of sheets : 2 to 15