AudioCodes RXV200 User And Administrator Manual page 89

User's and Administrator's Manual
RESTORE_DEFAULTS; wait for the button's LED to light up red and then release it;
the device enters recovery mode.
2. Long-press the button again to perform a required device reboot.
3. After the device is rebooted, it loads as an out-of-band management (OOB) device.
7.4 Saving Logs while Device is in Recovery Mode
The device features USB log export while in recovery mode. This feature enables users to
seamlessly save logs while their device is in recovery mode.
In Android recovery mode, the system automatically mounts a partition, enabling users to
connect a USB stick.
By simply clicking the Export logs to USB disk option, all logs are efficiently copied to the
USB stick, providing a convenient and reliable method for log management during recovery
procedures.
7.5 Restoring RXV200 Firmware via USB Disk
For recovery purposes, firmware can be applied to the RXV200 from a USB disk.
➢
To apply the firmware from the USB disk:
1. Enter recovery mode by pressing for 2-4 seconds the power button (Action:
ENTER_RECOVERY); the device's LED lights up red.
2. Short-press the power button to move down the menu options, and long-press to select
an option.
3. Insert the USB disk with the target firmware.
4. Select the Apply update from USB disk option and then choose the correct firmware
image from the disk.
Version 2.6 89
7. Debugging
RXV200