AudioCodes RXV200 User And Administrator Manual page 88

7.3 Performing Recovery Operations using Power
Button
Network administrators can perform recovery operations using the power button on the front
panel of the RXV200.
Note: Besides this recovery option, Android devices also feature an independent, automatic
problem detection and recovery attempt capability that can culminate in recovery mode or in
switching image slots.
The following figure shows the power button.
➢
To perform recovery operations:
1. Disconnect the power cord from the RXV200 while long-pressing the power button
shown in the preceding figure.
2. Reconnect the power cord and continue pressing the power button.
Press button
Nothing
ENTER_RECOVERY
On Uboot SWITCH_AB_SLOT
ENTER_LOADER
RESTORE_DEFAULTS
3. Short-press the power button to move down the menu options and long-press it to select
an action.
➢
To perform a factory reset (for example):
1. Short-press the power button to move down the menu options and long-press it to select
Version 2.6
Table 7-2: Recovery Operations
Action Press button for
<= 4 seconds
4 ~ 6 seconds
6 ~ 8 seconds
8 ~ 10 seconds
>= 10 seconds
LED indication after
releasing the button
Red
Green
Blue
Yellow
88 Document #: LTRT-09982
RXV200