AudioCodes RXV200 User And Administrator Manual page 51

User's and Administrator's Manual
5.1.4 Configuring Wi-Fi
The RXV200 can connect to an Access Point via Wi-Fi.
Network administrators can configure Wi-Fi parameters for the RXV200. The parameters are
concealed from the user's view. Users can enable | disable Wi-Fi in the device's user
interface.
Note: Wi-Fi cannot be enabled | disabled using SSH command.
The Wi-Fi connection is transparent to users; which frequency is used, 2.4 GHz or 5 GHz, is
made for users by the device; users cannot disable one or the other.
5.1.4.1 Connecting to an Available Wi-Fi Network
➢
To connect to an available Wi-Fi network:
Note: Make sure to first disconnect your Ethernet cable. If it's connected, the device will not be
able to connect to a Wi-Fi network.
Under 'Settings', navigate to Wi-Fi and enable Use Wi-Fi.
1.
2. View a list of available connections.
3. Select the Wi-Fi network you want and enter the password.
4. View the network you selected 'Connected'.
Version 2.6
5. Getting Familiar with RXV200 Settings
51 RXV200